Menu
CHF 132.30
CIRO DUR
Self-shining, extremely resistant
Gloss emulsion. Suitable for conditions with
intensive use due to high
Frequent use in public facilities such as
Shopping centers, supermarkets, various
Community facilities, schools, offices
and administrative wings, entrance halls, etc.
Good anti-slip properties, ensures
an above-average lifespan.
field of use
Ideal Ciro DUR is designed for high-traffic conditions in public facilities such as shopping centers,
Supermarkets, various community facilities, schools, offices and administrative wings, entrance halls,
etc. suitable.
It is used on all flexible substrates such as linoleum, PVC, vinyl asbestos, but also rubber
Recommended for all hard surfaces such as terracotta tiles, natural or artificial stone slabs.
Properties
Ideal Ciro DUR protective film has excellent resistance to wear
caused by visitor traffic: Wear due to high traffic, footwear marks, black
marks from shopping and other carts, various scratches, dust… .
In addition, this emulsion has good protective properties: It is resistant to food stains, water, in
Floor cleaning machines used detergents, and does not bind dust. To their removal is a
special paint remover required.
Compared to standard emulsions, Ideal Ciro DUR gives a protective film with a deep gloss
anti-slip properties and offers the advantage of a significantly longer service life.
Application method
To achieve good adhesion of the emulsion, old wax layers must be removed with the special paint stripper
Ideal Ciro STRIP After stripping, the floor must be carefully rinsed with water
to remove all solid particles and residues of the paint stripper.
Ideal Ciro DUR is to be used undiluted on the clean and dry floor and preferably with the help of a
applied to a special applicator. The coverage is between 30 and 50 m² per liter
Product and per shift; it depends largely on the porosity of the subsurface.
For the best result, use 2 to 3 thin coats of a single thick coat
preferable. A dispersion layer dries in a ventilated room and depending on the
Ambient temperature within 30 minutes to 1 hour.
After applying the last layer, it is recommended to wait a few hours before applying this again
is used / entered.
Do not use or store at temperatures below + 5 ° C. The equipment (applicator) under flowing
Rinse off with water.
The surfaces treated with Ideal Ciro DUR can be wiped off with a damp cloth, wet with a mop or sprayed
clean using the standard method or spray using the high-velocity method.
Each method corresponds to one or more special products:
– Cleaning and/or disinfecting solution for damp wiping and with a mop, for example: Sols or Asepto
– «Wash and Wax» product for wet treatment: Sols Ciro
– specific products for spraying: Ciro SPRAY
When cleaning, the properties inherent in the protective film, such as gloss,
Resilience, slip resistance … are retained.
Conformity / Approval
Ideal Ciro DUR is an aqueous emulsion based on metallized acrylic copolymers, synthetic
pulyurethane dispersion, polyethylene and polypropylene waxes and plasticizer additives.
Sales units:
Art. 105370
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
| Packaging unit | |
|---|---|
| Volumen |
CIRO DUR
Self-shining, extremely resistant
Gloss emulsion. Suitable for conditions with
intensive use due to high
Frequent use in public facilities such as
Shopping centers, supermarkets, various
Community facilities, schools, offices
and administrative wings, entrance halls, etc.
Good anti-slip properties, ensures
an above-average lifespan.
field of use
Ideal Ciro DUR is designed for high-traffic conditions in public facilities such as shopping centers,
Supermarkets, various community facilities, schools, offices and administrative wings, entrance halls,
etc. suitable.
It is used on all flexible substrates such as linoleum, PVC, vinyl asbestos, but also rubber
Recommended for all hard surfaces such as terracotta tiles, natural or artificial stone slabs.
Properties
Ideal Ciro DUR protective film has excellent resistance to wear
caused by visitor traffic: Wear due to high traffic, footwear marks, black
marks from shopping and other carts, various scratches, dust… .
In addition, this emulsion has good protective properties: It is resistant to food stains, water, in
Floor cleaning machines used detergents, and does not bind dust. To their removal is a
special paint remover required.
Compared to standard emulsions, Ideal Ciro DUR gives a protective film with a deep gloss
anti-slip properties and offers the advantage of a significantly longer service life.
Application method
To achieve good adhesion of the emulsion, old wax layers must be removed with the special paint stripper
Ideal Ciro STRIP After stripping, the floor must be carefully rinsed with water
to remove all solid particles and residues of the paint stripper.
Ideal Ciro DUR is to be used undiluted on the clean and dry floor and preferably with the help of a
applied to a special applicator. The coverage is between 30 and 50 m² per liter
Product and per shift; it depends largely on the porosity of the subsurface.
For the best result, use 2 to 3 thin coats of a single thick coat
preferable. A dispersion layer dries in a ventilated room and depending on the
Ambient temperature within 30 minutes to 1 hour.
After applying the last layer, it is recommended to wait a few hours before applying this again
is used / entered.
Do not use or store at temperatures below + 5 ° C. The equipment (applicator) under flowing
Rinse off with water.
The surfaces treated with Ideal Ciro DUR can be wiped off with a damp cloth, wet with a mop or sprayed
clean using the standard method or spray using the high-velocity method.
Each method corresponds to one or more special products:
– Cleaning and/or disinfecting solution for damp wiping and with a mop, for example: Sols or Asepto
– «Wash and Wax» product for wet treatment: Sols Ciro
– specific products for spraying: Ciro SPRAY
When cleaning, the properties inherent in the protective film, such as gloss,
Resilience, slip resistance … are retained.
Conformity / Approval
Ideal Ciro DUR is an aqueous emulsion based on metallized acrylic copolymers, synthetic
pulyurethane dispersion, polyethylene and polypropylene waxes and plasticizer additives.
Sales units:
Art. 105370
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
