Menu
CHF 108.50
CIRO POLY
Self-shining multi-purpose emulsion, silky to
glittering. Very high wear resistance,
Resistance to water and
Cleaning solutions. Usually leads
No or hardly any pedal stress
Wear and tear on the treated floors.
Field of application
Ciro POLY is a standard self-shining multi-purpose emulsion.
It can be applied on all flexible or hard surfaces: Linoleum, PVC, vinyl asbestos, laminated
wood, terracotta tiles, natural or artificial stone slabs.
Properties
Ciro POLY has very high wear resistance, resistance to water and cleaning solutions
; as a rule, foot traffic does not or hardly cause wear or deterioration of the treated
floors.
The durability or service life of the protective film is particularly high and therefore under
interesting from an economic point of view.
In addition, Ciro POLY gives the treated surfaces a radiant shine,
anti-slip properties and does not bind dust.
Way of application
In order to achieve good adhesion of the dispersion, old layers of wax must be treated with the special paint remover
Ciro STRIP can be removed. After treatment, the floor must be carefully rinsed with water
to remove all solid particles and paint remover residue.
Ciro POLY is applied undiluted to the clean and dry floor, preferably with the help of a
applied to a special applicator. The average coverage is between 30 and 50 m²
per liter of product and per shift; it depends essentially on the porosity of the subsurface.
For best results, 2 to 3 thin coats are preferred over a single thick coat.
A dispersion layer dries in a ventilated room and, depending on the ambient temperature, inside
from 30 minutes to 1 hour.
After applying the last layer, it is recommended to wait a few hours before using / entering it again.
Do not use or store at temperatures below + 5 ° C. Rinse the equipment (applicator) under running water.
The surfaces treated with Ciro POLY can be cleaned with a damp wipe, wet with a mop, by spraying using the standard method or high-speed methods.
Each method corresponds to one or more special products:
– Cleaning and / or disinfectant solution for damp wiping and with the mop, for example: Ideal Sols, Ideal
Asepto
– «Wash and wax» product for wet treatment: Ideal Sols Cire
– special products for spray processes: Ideal Ciro SPRAY
When cleaning, the properties inherent in the protective film, such as gloss,
Resilience, slip resistance … are retained.
Conformity / Approval
Ciro POLY is a water dispersion based on metallized styrene-acrylic copolymers, synthetic
wax emulsions and alkali-soluble resin.
Sales units:
Art. 105363
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
| Packaging unit | |
|---|---|
| Volumen |
CIRO POLY
Self-shining multi-purpose emulsion, silky to
glittering. Very high wear resistance,
Resistance to water and
Cleaning solutions. Usually leads
No or hardly any pedal stress
Wear and tear on the treated floors.
Field of application
Ciro POLY is a standard self-shining multi-purpose emulsion.
It can be applied on all flexible or hard surfaces: Linoleum, PVC, vinyl asbestos, laminated
wood, terracotta tiles, natural or artificial stone slabs.
Properties
Ciro POLY has very high wear resistance, resistance to water and cleaning solutions
; as a rule, foot traffic does not or hardly cause wear or deterioration of the treated
floors.
The durability or service life of the protective film is particularly high and therefore under
interesting from an economic point of view.
In addition, Ciro POLY gives the treated surfaces a radiant shine,
anti-slip properties and does not bind dust.
Way of application
In order to achieve good adhesion of the dispersion, old layers of wax must be treated with the special paint remover
Ciro STRIP can be removed. After treatment, the floor must be carefully rinsed with water
to remove all solid particles and paint remover residue.
Ciro POLY is applied undiluted to the clean and dry floor, preferably with the help of a
applied to a special applicator. The average coverage is between 30 and 50 m²
per liter of product and per shift; it depends essentially on the porosity of the subsurface.
For best results, 2 to 3 thin coats are preferred over a single thick coat.
A dispersion layer dries in a ventilated room and, depending on the ambient temperature, inside
from 30 minutes to 1 hour.
After applying the last layer, it is recommended to wait a few hours before using / entering it again.
Do not use or store at temperatures below + 5 ° C. Rinse the equipment (applicator) under running water.
The surfaces treated with Ciro POLY can be cleaned with a damp wipe, wet with a mop, by spraying using the standard method or high-speed methods.
Each method corresponds to one or more special products:
– Cleaning and / or disinfectant solution for damp wiping and with the mop, for example: Ideal Sols, Ideal
Asepto
– «Wash and wax» product for wet treatment: Ideal Sols Cire
– special products for spray processes: Ideal Ciro SPRAY
When cleaning, the properties inherent in the protective film, such as gloss,
Resilience, slip resistance … are retained.
Conformity / Approval
Ciro POLY is a water dispersion based on metallized styrene-acrylic copolymers, synthetic
wax emulsions and alkali-soluble resin.
Sales units:
Art. 105363
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
