Menu
CHF 20.90
Fast descaler, recommended for drains, faucets,
Baths, etc. Does not corrode and does not attack chrome (also used as a
Gel available : see CALIGEL).
ECO-LABEL: Biodegradable >97% in 28 days (OECD
302b).
| Density | COV% | pH |
|---|---|---|
| 1.035 | 0 | 1.5 |
ECOCALC is applied to surfaces and floors made of tiles, earthenware, ceramics, faience, sanitary ware and acid-resistant materials such as
they are found in official facilities, industrial and commercial enterprises, swimming pools, applied. Can be used on cement floors
be applied to neutralize them before painting or to give them a clean appearance and remove all dust
Remove
ECOCALC cannot be applied on marble, travertine and generally on marble or calcareous natural stone floors or artificial stone floors.
be applied.
Instructions for use
Recommended dosage
2% for light decalcification
10% for thorough decalcification
20% for immersion decalcification
Increase dosage depending on the degree of contamination, exposure time, application with machines or heating.
Recommended use
Can be used with all manual equipment and all machines such as single-disc machines, scrubber-driers, pressure boosters, etc.
Recommended steps
-Remove coarse dirt.
-Apply the ECOCALC water solution.
-Actuate a mechanical brushing cycle.
-Leave to act (5-20 minutes depending on the size of the insert) and repeat brushing. Keep the surfaces moist during this process.
-Remove the dirt solution, manually with a squeegee or with a machine.
-Rinse thoroughly and remove the rinsing water. If possible, use a pH paper to check the neutrality of the final rinse water.
Comments
Due to the large number of available building materials, it is recommended that a test on a test surface or a non-visible surface be carried out in advance.
if there is any doubt as to the nature or durability of the surface in question and its environment, or as to
the nature of the pollution exist.
properties
Composition: Anionic and amphoteric surfactants, strong mineral acids, corrosion inhibitors.
ECOCALC decalcifies and cleans at the same time: it has a staining effect and destroys lime haze, lime deposits, cement and
Gypsum traces, mineral salt residues, metal oxides due to specific acidic ingredients.
ECOCALC is a balanced chemical compound that removes dust, micro-residues, surface greases, through the wetting
surface-active, emulsifying, dispersing substances it contains.
ECOCALC is used periodically for renovation of surfaces and floors of tiles and earthenware. The daily
Wiping water leaves a lime film over time, which bleaches the surfaces, causing the dirt to settle again
and the development of fermentation and microbes is promoted.
ECOCALC destroys and removes these deposits, the treatment being completely harmless to the immediate environment, which the
product contains corrosion inhibitors that limit and stop its aggressiveness against metals.
Info / Confo / Homolog
Danger to users: Corrosive product. Causes skin burns and severe eye damage. Wear appropriate PPE.
Biodegradability: readily biodegradable, 96% in 14 days, extended test OECD 302 B with CO2 determination
Waste code number VEVA/OMOD (CH): 06 01 06
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
| Volumen |
|---|
Fast descaler, recommended for drains, faucets,
Baths, etc. Does not corrode and does not attack chrome (also used as a
Gel available : see CALIGEL).
ECO-LABEL: Biodegradable >97% in 28 days (OECD
302b).
| Density | COV% | pH |
|---|---|---|
| 1.035 | 0 | 1.5 |
ECOCALC is applied to surfaces and floors made of tiles, earthenware, ceramics, faience, sanitary ware and acid-resistant materials such as
they are found in official facilities, industrial and commercial enterprises, swimming pools, applied. Can be used on cement floors
be applied to neutralize them before painting or to give them a clean appearance and remove all dust
Remove
ECOCALC cannot be applied on marble, travertine and generally on marble or calcareous natural stone floors or artificial stone floors.
be applied.
Instructions for use
Recommended dosage
2% for light decalcification
10% for thorough decalcification
20% for immersion decalcification
Increase dosage depending on the degree of contamination, exposure time, application with machines or heating.
Recommended use
Can be used with all manual equipment and all machines such as single-disc machines, scrubber-driers, pressure boosters, etc.
Recommended steps
-Remove coarse dirt.
-Apply the ECOCALC water solution.
-Actuate a mechanical brushing cycle.
-Leave to act (5-20 minutes depending on the size of the insert) and repeat brushing. Keep the surfaces moist during this process.
-Remove the dirt solution, manually with a squeegee or with a machine.
-Rinse thoroughly and remove the rinsing water. If possible, use a pH paper to check the neutrality of the final rinse water.
Comments
Due to the large number of available building materials, it is recommended that a test on a test surface or a non-visible surface be carried out in advance.
if there is any doubt as to the nature or durability of the surface in question and its environment, or as to
the nature of the pollution exist.
properties
Composition: Anionic and amphoteric surfactants, strong mineral acids, corrosion inhibitors.
ECOCALC decalcifies and cleans at the same time: it has a staining effect and destroys lime haze, lime deposits, cement and
Gypsum traces, mineral salt residues, metal oxides due to specific acidic ingredients.
ECOCALC is a balanced chemical compound that removes dust, micro-residues, surface greases, through the wetting
surface-active, emulsifying, dispersing substances it contains.
ECOCALC is used periodically for renovation of surfaces and floors of tiles and earthenware. The daily
Wiping water leaves a lime film over time, which bleaches the surfaces, causing the dirt to settle again
and the development of fermentation and microbes is promoted.
ECOCALC destroys and removes these deposits, the treatment being completely harmless to the immediate environment, which the
product contains corrosion inhibitors that limit and stop its aggressiveness against metals.
Info / Confo / Homolog
Danger to users: Corrosive product. Causes skin burns and severe eye damage. Wear appropriate PPE.
Biodegradability: readily biodegradable, 96% in 14 days, extended test OECD 302 B with CO2 determination
Waste code number VEVA/OMOD (CH): 06 01 06
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
