Menu
CHF 15.25 – CHF 178.00
Highly effective and very aggressive super renovation cleaner that removes metal oxides, metal corrosion,
Carbon deposits destroyed and dissolved and facades,
structures, decks, sides, rims, etc. back to their original state.
original splendor.
Suitable for the treatment of aluminum. Can also be used for
attack on glass and ceramics.
A prior test in a corner is mandatory.
scope of application
METALU is a balanced complex based on surface-active substances, emulsifiers, dispersing agents, mineral
Acids and fluoride salt. It was specially developed for the renewal of aluminum surfaces, but also achieves good results on steel and other non-aluminum surfaces.
ferrous metals.
METALU should be used regularly for cleaning and renewing aluminum surfaces, in particular: Rims, radiator grilles,
Side walls, side panels of trucks, buckets and tanks of road and rail vehicles, construction elements (facades…)
METALU is also effective in combating glass or ceramics (elimination of lines, reduction of the slip effect, etc.).
Instructions for use
Recommended dosage
Due to its high concentration of active ingredients and depending on the degree of soiling, it can be diluted with cold water:
– 1% to 15% for thorough cleaning
– 15% to 40% for stripping and a strong attack.
Caution: Do not use pure!
Fragile and / or sensitive surfaces or materials must be protected beforehand.
Do not apply to overheated surfaces.
Recommended steps
– Clean the surface of the most important impurities.
– Re-wet the surface if necessary to reduce the risk of runner marks.
– Apply METALU with all manual tools, brushes, sponges or low-pressure sprayers. On vertical surfaces from bottom to top
work at the top.
– Leave to act for a few minutes; you will notice the formation of an effervescent foam, which reflects the chemical effect of METALU.
– Rinse with plenty of cold water, preferably at high pressure and from top to bottom if the wall is vertical.
Comments
Due to the large number of available building materials, it is recommended that a test on a test surface or a non-visible surface be carried out in advance.
if there is any doubt about the quality or durability of the surface in question (anodized aluminum, chrome-plated
or galvanized parts, copper alloys, glass or ceramic materials, plastics) and their environment or with regard to the type of
Contamination exist
properties
properties
Composition: Non-ionic, biodegradable, surface-active substances, strong mineral acids, ammonium hydrogen fluoride.
METALU chemically destroys and decomposes metal oxides, corrosion on metal, residues of
mineral salts, lime crusts, carbon deposits, soot and restores the treated metals to their original shine.
METALU makes cleaning easier and significantly reduces working time.
It is therefore advantageous and economical for cleaning companies, maintenance companies for buildings in all sectors and road construction companies.
It can also be used for the renewal of various appliances in the food industry. Very thorough rinsing is required there,
to remove all product residues.
Information / Approval / Recycling
Hazards for users: Corrosive product. Causes severe skin burns and eye damage. Suitable PPE (mask,
Wear gloves, safety glasses …).
Waste code number VEVA/OMoD (CH): 06 01 06
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
Highly effective and very aggressive super renovation cleaner that removes metal oxides, metal corrosion,
Carbon deposits destroyed and dissolved and facades,
structures, decks, sides, rims, etc. back to their original state.
original splendor.
Suitable for the treatment of aluminum. Can also be used for
attack on glass and ceramics.
A prior test in a corner is mandatory.
scope of application
METALU is a balanced complex based on surface-active substances, emulsifiers, dispersing agents, mineral
Acids and fluoride salt. It was specially developed for the renewal of aluminum surfaces, but also achieves good results on steel and other non-aluminum surfaces.
ferrous metals.
METALU should be used regularly for cleaning and renewing aluminum surfaces, in particular: Rims, radiator grilles,
Side walls, side panels of trucks, buckets and tanks of road and rail vehicles, construction elements (facades…)
METALU is also effective in combating glass or ceramics (elimination of lines, reduction of the slip effect, etc.).
Instructions for use
Recommended dosage
Due to its high concentration of active ingredients and depending on the degree of soiling, it can be diluted with cold water:
– 1% to 15% for thorough cleaning
– 15% to 40% for stripping and a strong attack.
Caution: Do not use pure!
Fragile and / or sensitive surfaces or materials must be protected beforehand.
Do not apply to overheated surfaces.
Recommended steps
– Clean the surface of the most important impurities.
– Re-wet the surface if necessary to reduce the risk of runner marks.
– Apply METALU with all manual tools, brushes, sponges or low-pressure sprayers. On vertical surfaces from bottom to top
work at the top.
– Leave to act for a few minutes; you will notice the formation of an effervescent foam, which reflects the chemical effect of METALU.
– Rinse with plenty of cold water, preferably at high pressure and from top to bottom if the wall is vertical.
Comments
Due to the large number of available building materials, it is recommended that a test on a test surface or a non-visible surface be carried out in advance.
if there is any doubt about the quality or durability of the surface in question (anodized aluminum, chrome-plated
or galvanized parts, copper alloys, glass or ceramic materials, plastics) and their environment or with regard to the type of
Contamination exist
properties
properties
Composition: Non-ionic, biodegradable, surface-active substances, strong mineral acids, ammonium hydrogen fluoride.
METALU chemically destroys and decomposes metal oxides, corrosion on metal, residues of
mineral salts, lime crusts, carbon deposits, soot and restores the treated metals to their original shine.
METALU makes cleaning easier and significantly reduces working time.
It is therefore advantageous and economical for cleaning companies, maintenance companies for buildings in all sectors and road construction companies.
It can also be used for the renewal of various appliances in the food industry. Very thorough rinsing is required there,
to remove all product residues.
Information / Approval / Recycling
Hazards for users: Corrosive product. Causes severe skin burns and eye damage. Suitable PPE (mask,
Wear gloves, safety glasses …).
Waste code number VEVA/OMoD (CH): 06 01 06
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
