Menu
CHF 59.00 – CHF 996.00
Non-foaming chlorine-based cleaner.
Designed for use in machines (type
scrubber-dryer), but is also suitable for manual
Care of all modern floors and is used for large areas
recommended.
Addition of a chlorine component to improve the purification of the surfactants.
by an oxidizing function for a perfect result
to add
| Density | COV% | pH |
|---|---|---|
| 1.125 | 0 | 13 |
Field of application
AUTOLAV CLOR is a grease-dissolving detergent for professional use, highly concentrated and specially designed for use in
scrubber-driers and all cleaning machines; it is also suitable for manual use.
Due to its composition, this cleaner can also be assigned to the category of “disinfecting agents”, as it is
has disinfecting and antimicrobial properties that complement the cleaning process and guarantee perfect hygiene.
Thanks to its oxidizing effect, it is particularly effective in removing soiling with strong odors such as urine, stool, vomit
etc.
Instructions for use
Recommended dosage:
– 1% in daily cleaning use.
– 5 to 20% for rehabilitation and renovation works.
Recommended use:
Special product for scrubbing machines. Can also be used with single disc machines or high pressure machines.
Recommended stages:
– Daily cleaning: The dirt is picked up. AUTOLAV CLOR is applied to the floor with the scrubbing machine, it is
mechanical brushing takes place, then the remaining dirt solution is sucked up by the machine. The floor dries
immediately and no further step is required for daily cleaning.
– Remediation: Heavy dirt is picked up. AUTOLAV CLOR is applied to the floor with a scrubber-dryer, it is followed by
a first mechanical brushing, the dirt solution is not immediately absorbed by the machine. It further affects the
Contamination in. After a variable exposure time, about 20 minutes, the scrubber drier returns to the starting point, sprays
additional water, performs a second brushing pass and sucks up the remaining dirt solution. A rinse with water
is recommended.
Hints:
Due to the large number of available building materials, it is recommended that a test on a test surface or a non-visible surface be carried out in advance.
if there is any doubt as to the nature or durability of the surface in question and its environment, or as to
the nature of the pollution exist.
Precautions:
If splashes accidentally get onto sensitive materials, rinse immediately with plenty of water.
It is advised to use up AUTOLAV CLOR quickly and completely. If it must be stored, the container must be straight, dry and
be stored protected from light.
properties
Composition: Surface active agents , alkali salts and hydroxides, water soluble solubilizing agents.
AUTOLAV CLOR acts very quickly, for daily cleaning of large surfaces in shopping centers, government offices or industry.
The floors to be treated mostly include various types of tiles, thermoplastic or similar floors, smooth or painted
Cement. It can also be used for renovation or repair of heavily soiled floors in factories, warehouses, parking garages
will.
Info / Confo / Homolog
Hazards for users: Corrosive product. Causes severe skin burns and eye damage. Suitable PPE (mask,
Wear gloves, safety glasses …).
Biodegradability: more than 90 % – EEC guidelines for the biodegradability of surface-active substances.
Waste code number VEVA/OMoD (CH): 06 02 05
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
Non-foaming chlorine-based cleaner.
Designed for use in machines (type
scrubber-dryer), but is also suitable for manual
Care of all modern floors and is used for large areas
recommended.
Addition of a chlorine component to improve the purification of the surfactants.
by an oxidizing function for a perfect result
to add
| Density | COV% | pH |
|---|---|---|
| 1.125 | 0 | 13 |
Field of application
AUTOLAV CLOR is a grease-dissolving detergent for professional use, highly concentrated and specially designed for use in
scrubber-driers and all cleaning machines; it is also suitable for manual use.
Due to its composition, this cleaner can also be assigned to the category of “disinfecting agents”, as it is
has disinfecting and antimicrobial properties that complement the cleaning process and guarantee perfect hygiene.
Thanks to its oxidizing effect, it is particularly effective in removing soiling with strong odors such as urine, stool, vomit
etc.
Instructions for use
Recommended dosage:
– 1% in daily cleaning use.
– 5 to 20% for rehabilitation and renovation works.
Recommended use:
Special product for scrubbing machines. Can also be used with single disc machines or high pressure machines.
Recommended stages:
– Daily cleaning: The dirt is picked up. AUTOLAV CLOR is applied to the floor with the scrubbing machine, it is
mechanical brushing takes place, then the remaining dirt solution is sucked up by the machine. The floor dries
immediately and no further step is required for daily cleaning.
– Remediation: Heavy dirt is picked up. AUTOLAV CLOR is applied to the floor with a scrubber-dryer, it is followed by
a first mechanical brushing, the dirt solution is not immediately absorbed by the machine. It further affects the
Contamination in. After a variable exposure time, about 20 minutes, the scrubber drier returns to the starting point, sprays
additional water, performs a second brushing pass and sucks up the remaining dirt solution. A rinse with water
is recommended.
Hints:
Due to the large number of available building materials, it is recommended that a test on a test surface or a non-visible surface be carried out in advance.
if there is any doubt as to the nature or durability of the surface in question and its environment, or as to
the nature of the pollution exist.
Precautions:
If splashes accidentally get onto sensitive materials, rinse immediately with plenty of water.
It is advised to use up AUTOLAV CLOR quickly and completely. If it must be stored, the container must be straight, dry and
be stored protected from light.
properties
Composition: Surface active agents , alkali salts and hydroxides, water soluble solubilizing agents.
AUTOLAV CLOR acts very quickly, for daily cleaning of large surfaces in shopping centers, government offices or industry.
The floors to be treated mostly include various types of tiles, thermoplastic or similar floors, smooth or painted
Cement. It can also be used for renovation or repair of heavily soiled floors in factories, warehouses, parking garages
will.
Info / Confo / Homolog
Hazards for users: Corrosive product. Causes severe skin burns and eye damage. Suitable PPE (mask,
Wear gloves, safety glasses …).
Biodegradability: more than 90 % – EEC guidelines for the biodegradability of surface-active substances.
Waste code number VEVA/OMoD (CH): 06 02 05
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
