Menu
CHF 150.20
CIRO MAT
Matt, anti-reflective multi-purpose emulsion.
Very high wear resistance, durability
against water and cleaning solutions. To
DIN 18032-2, excellent for sports and
Suitable for multi-purpose halls.
Application area
Ciro MAT is suitable for high traffic conditions in public facilities such as shopping malls,
supermarkets, various community facilities, schools, offices and administrative wings, entrance halls,
, etc.
According to DIN 18032-2, ideally suited for sports and multi-purpose halls.
It is used on all flexible substrates such as linoleum, PVC, vinyl asbestos, but also rubber
Recommended for all hard surfaces such as terracotta tiles, natural or artificial stone slabs.
Properties
Ciro MAT has very high wear resistance, resistance to water and cleaning solutions
; as a rule, foot traffic does not cause wear or wear on the treated
floors, or hardly at all.
The durability or service life of the protective film is particularly high and therefore under
interesting from an economic point of view.
In addition, Ideal Ciro MAT gives the treated surfaces a matte appearance as well
anti-reflective and anti-slip properties and does not bind dust.
Way of application
In order to achieve good adhesion of the dispersion, old layers of wax must be treated with the special paint remover
Ideally Ciro STRIP can be removed. After treatment, the floor must be carefully rinsed with water
to remove all solid particles and paint remover residue.
Ciro MAT is applied to the clean and dry floor undiluted and preferably with the help of a
applied to a special applicator. The average coverage is between 30 and 50 m²
per liter of product and per shift; it depends essentially on the porosity of the subsurface.
For best results, 2 to 3 thin coats are preferred over a single thick coat.
A dispersion layer dries in a ventilated room and, depending on the ambient temperature, inside
from 30 minutes to 1 hour.
After applying the last layer, it is recommended to wait a few hours before applying this again
is used / entered.
Do not use or store at temperatures below + 5 ° C. The equipment (applicator) under flowing
Rinse off with water. The surfaces treated with Ideal Ciro MAT can be wiped with a damp cloth
the mop, standard or high speed spraying.
Each method corresponds to one or more special products:
– Cleaning and/or disinfecting solution for damp wiping and with a mop, for example: Sols, Asepto
– «Wash and Wax» product for wet treatment: Sols Cire
– specific products for spraying: Ciro SPRAY
When cleaning, the properties inherent in the protective film, such as
Anti-reflection, resistance, slip resistance … are retained.
Conformity / Approval
Ideal Ciro MAT is a water dispersion based on metallized styrene-acrylic copolymers, synthetic
wax emulsions and alkali-soluble resin.
Sales units:
Art. 105431
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
| Packaging unit | |
|---|---|
| Volumen |
CIRO MAT
Matt, anti-reflective multi-purpose emulsion.
Very high wear resistance, durability
against water and cleaning solutions. To
DIN 18032-2, excellent for sports and
Suitable for multi-purpose halls.
Application area
Ciro MAT is suitable for high traffic conditions in public facilities such as shopping malls,
supermarkets, various community facilities, schools, offices and administrative wings, entrance halls,
, etc.
According to DIN 18032-2, ideally suited for sports and multi-purpose halls.
It is used on all flexible substrates such as linoleum, PVC, vinyl asbestos, but also rubber
Recommended for all hard surfaces such as terracotta tiles, natural or artificial stone slabs.
Properties
Ciro MAT has very high wear resistance, resistance to water and cleaning solutions
; as a rule, foot traffic does not cause wear or wear on the treated
floors, or hardly at all.
The durability or service life of the protective film is particularly high and therefore under
interesting from an economic point of view.
In addition, Ideal Ciro MAT gives the treated surfaces a matte appearance as well
anti-reflective and anti-slip properties and does not bind dust.
Way of application
In order to achieve good adhesion of the dispersion, old layers of wax must be treated with the special paint remover
Ideally Ciro STRIP can be removed. After treatment, the floor must be carefully rinsed with water
to remove all solid particles and paint remover residue.
Ciro MAT is applied to the clean and dry floor undiluted and preferably with the help of a
applied to a special applicator. The average coverage is between 30 and 50 m²
per liter of product and per shift; it depends essentially on the porosity of the subsurface.
For best results, 2 to 3 thin coats are preferred over a single thick coat.
A dispersion layer dries in a ventilated room and, depending on the ambient temperature, inside
from 30 minutes to 1 hour.
After applying the last layer, it is recommended to wait a few hours before applying this again
is used / entered.
Do not use or store at temperatures below + 5 ° C. The equipment (applicator) under flowing
Rinse off with water. The surfaces treated with Ideal Ciro MAT can be wiped with a damp cloth
the mop, standard or high speed spraying.
Each method corresponds to one or more special products:
– Cleaning and/or disinfecting solution for damp wiping and with a mop, for example: Sols, Asepto
– «Wash and Wax» product for wet treatment: Sols Cire
– specific products for spraying: Ciro SPRAY
When cleaning, the properties inherent in the protective film, such as
Anti-reflection, resistance, slip resistance … are retained.
Conformity / Approval
Ideal Ciro MAT is a water dispersion based on metallized styrene-acrylic copolymers, synthetic
wax emulsions and alkali-soluble resin.
Sales units:
Art. 105431
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
