CLEANBOAT

CHF 10.50CHF 44.00

SKU N/A Categories ,

Description

Highly effective surface cleaner for refreshing all parts:
Hood, painted wood, rope, plastic spinner, ballast,
Keel, deck, propeller, gelcoat, etc.
ECO-LABEL: 100% biodegradable in 14 days according to
OECD 302B.

Density COV% pH
1.053 0 10

scope of application
Cleaning degreaser with low foaming, which removes soot, various dusts, greasy dirt and traces of hydrocarbons.
removed.

Instructions for use
Recommended dosage
Dissolve 5% in cold or lukewarm water.

Recommended steps
– Spread on the surface to be cleaned with a brush or cloth.
– Allow to act briefly, scrub and rinse with warm or cold water.
– In case of stubborn stains, repeat the procedure or double the dosage (10%).
ATTENTION!
– Do not use on sun-heated surfaces, rinse before product dries, keep frost-free.
– Chemicals should not be applied to surfaces and then poured into rainwater. All products must be used in wastewater
are collected. They must either be removed from the wastewater or sent to a disposal site.
properties
Composition: surfactants, salts and silicates, auxiliaries
Info / Confo / Homolog
Waste code VEVA/OMOD (CH): 07 06 01


For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!

Additional information

Volumen

,

Highly effective surface cleaner for refreshing all parts:
Hood, painted wood, rope, plastic spinner, ballast,
Keel, deck, propeller, gelcoat, etc.
ECO-LABEL: 100% biodegradable in 14 days according to
OECD 302B.

Density COV% pH
1.053 0 10

scope of application
Cleaning degreaser with low foaming, which removes soot, various dusts, greasy dirt and traces of hydrocarbons.
removed.

Instructions for use
Recommended dosage
Dissolve 5% in cold or lukewarm water.

Recommended steps
– Spread on the surface to be cleaned with a brush or cloth.
– Allow to act briefly, scrub and rinse with warm or cold water.
– In case of stubborn stains, repeat the procedure or double the dosage (10%).
ATTENTION!
– Do not use on sun-heated surfaces, rinse before product dries, keep frost-free.
– Chemicals should not be applied to surfaces and then poured into rainwater. All products must be used in wastewater
are collected. They must either be removed from the wastewater or sent to a disposal site.
properties
Composition: surfactants, salts and silicates, auxiliaries
Info / Confo / Homolog
Waste code VEVA/OMOD (CH): 07 06 01


For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!