Menu
CHF 106.90
IDEAL CIRO GRIP
IDEAL CIRO GRIP is a water dispersion based on
refined olefin acrylate polymer, synthetic
Wax emulsions and alkali-soluble resin. IDEAL CIRO
GRIP can be used on hard and smooth floors such as polished natural or artificial stone, stoneware tiles, glazed sealed
Brick tiles, terracotta or ceramic tiles, etc.
be applied.
Field of application
IDEAL CIRO GRIP can be applied to hard and smooth floors such as polished natural or artificial stone, stoneware tiles,
glazed sealed brick tiles, terracotta or ceramic tiles, etc.
Properties
IDEAL CIRO GRIP is a water dispersion based on refined olefin acrylate polymer, synthetic
wax emulsions and alkali-soluble resin.
IDEAL CIRO GRIP has good adhesion, a beautiful sheen and anti-slip properties
and does not bind dust.
The film formed is to be classified as temporary, but is cleaned by “washing and wax” cleaning or by means of
Spraying process renewed.
Way of application
In order to achieve good adhesion of the dispersion, old layers of wax must be treated with the special paint stripper IDEAL
CIRO STRIP must be removed. After treatment, the floor must be carefully rinsed with water to remove all
to remove solid particles and paint remover residues.
IDEAL CIRO GRIP is applied in 10 to 20% dilution, preferably with the help of a special applicator.
However, it can also be applied in a thin layer with a mop, wipe …
Let it dry and apply a second coat if necessary.
The average coverage is between 30 and 50 m² per liter of solution and per layer; it depends essentially
on the porosity of the substrate.
For best results, 2 to 3 thin coats are preferred over a single thick coat.
After applying the last layer, it is recommended to wait a few hours before using / entering it again.
Do not use or store at temperatures below + 5 ° C. The equipment used under running water
rinse off.
The surfaces treated with IDEAL CIRO GRIP can be removed by wiping with a damp cloth in a 2% dosage or
Clean spray processes with an average dosage of 20%.
When cleaning, the properties inherent in the protective film, such as gloss,
Resilience, slip resistance … are retained.
Sales units:
Art. 105654
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
| Packaging unit | |
|---|---|
| Volumen |
IDEAL CIRO GRIP
IDEAL CIRO GRIP is a water dispersion based on
refined olefin acrylate polymer, synthetic
Wax emulsions and alkali-soluble resin. IDEAL CIRO
GRIP can be used on hard and smooth floors such as polished natural or artificial stone, stoneware tiles, glazed sealed
Brick tiles, terracotta or ceramic tiles, etc.
be applied.
Field of application
IDEAL CIRO GRIP can be applied to hard and smooth floors such as polished natural or artificial stone, stoneware tiles,
glazed sealed brick tiles, terracotta or ceramic tiles, etc.
Properties
IDEAL CIRO GRIP is a water dispersion based on refined olefin acrylate polymer, synthetic
wax emulsions and alkali-soluble resin.
IDEAL CIRO GRIP has good adhesion, a beautiful sheen and anti-slip properties
and does not bind dust.
The film formed is to be classified as temporary, but is cleaned by “washing and wax” cleaning or by means of
Spraying process renewed.
Way of application
In order to achieve good adhesion of the dispersion, old layers of wax must be treated with the special paint stripper IDEAL
CIRO STRIP must be removed. After treatment, the floor must be carefully rinsed with water to remove all
to remove solid particles and paint remover residues.
IDEAL CIRO GRIP is applied in 10 to 20% dilution, preferably with the help of a special applicator.
However, it can also be applied in a thin layer with a mop, wipe …
Let it dry and apply a second coat if necessary.
The average coverage is between 30 and 50 m² per liter of solution and per layer; it depends essentially
on the porosity of the substrate.
For best results, 2 to 3 thin coats are preferred over a single thick coat.
After applying the last layer, it is recommended to wait a few hours before using / entering it again.
Do not use or store at temperatures below + 5 ° C. The equipment used under running water
rinse off.
The surfaces treated with IDEAL CIRO GRIP can be removed by wiping with a damp cloth in a 2% dosage or
Clean spray processes with an average dosage of 20%.
When cleaning, the properties inherent in the protective film, such as gloss,
Resilience, slip resistance … are retained.
Sales units:
Art. 105654
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
