Menu
CHF 96.25 – CHF 2'750.00
Glycol heat transfer fluid, according to SICC BT102-01 for
SOLAR SYSTEMS (solar modules, solar systems.
Ready for use, non-toxic, resistant to high
temperatures (>198°C), corrosion protected, filled with
demineralized water.
Propylene glycol-based (EC)
| Density | COV% | pH |
|---|---|---|
| 1.040 | 0 | 7.5 |
scope of application
It is a concentrated heat transfer antifreeze fluid based on propylene glycol and corrosion inhibitors, especially for
Solar heating systems with water circulation developed. Prevents the proliferation of bacteria and damage to the circulation systems.
Improves heat transfer capability and protects against frost (-27°C).
Nitrite-free, avoids lime deposits, suitable for tube collectors.
If the condition of the heat transfer fluid is no longer perfect (it is burnt), you can use the cleaning fluid Chaufaclean S
use to clean the plant.
Instructions for use
Recommended dosage:
Ready to use CHAUFASOL S is calibrated for -27°C with RECO water (according to SICC BT102-01), so it must be used undiluted.
Recommended use:
Suitable for high stagnation temperatures (>198°C), for systems with balancing collectors. Above this temperature there is a
slow deterioration of the fluid, which reduces its reliability, which may eventually lead to damage of the equipment
(carbonization) if the system is not drained into the expansion tanks.
The maintenance of the equipment in the field of solar energy ensures high performance and is carried out as part of the maintenance work
recommended.
For this purpose, our laboratory offers a quality control of the circulating fluid (CIRCUSOL analysis).
Hints:
Due to the large number of available building materials, it is recommended that a test on a test surface or a non-visible surface be carried out in advance.
if there is any doubt as to the nature or durability of the surface in question and its environment, or as to
the nature of the pollution exist.
properties
Appearance: transparent liquid, pink to light pink.
Pure density at 20°C: 1.043 +/-0.002 pH: 7.7 to 9.2 +/-0.2
Freezing point (slurry): -27 +/-2°C Boiling point at normal pressure : 105 +/-2°C
Conductivity: 1880.0 +/-100.0 microSiemens/cm Flash point: >100°C
The CHAUFAGEL S product is approved as a heat transfer fluid in domestic hot water preparation with easy replacement, as it does not contain any
poses a significant health risk.
Material compatibility:
The standard grades of the polymers listed below are normally compatible with CHAUFAGEL S.
The minimum and maximum operating temperatures depend on the quality of the elastomer and must be requested from the material manufacturer.
will.
Suitable for: Nitrile (NBR) / Hydrogenated Nitrile (H-NBR) / Acrylate (ACM) / Silicone (MVQ) / Fluorocarbon, Viton (FPM) / Ethylene Propylene Diene
(EPDM) / butyl group (IIR) / natural rubber (NR) / polychloroprene – Néopren (CR) / styrene-butadiene (SBR) / polypropylene (PP) /
Polytetrafluoroethylene, Teflon (PTFE) / Polyamide (PA) / Polyethylene (PEHD, PEBD)
/ Polyvinyl chloride (PVC) / Polyester resin (UP)-
This information does not constitute a warranty or commitment as to the manufacturing quality of the material.
CHAUFAGEL S provides excellent frost protection as well as increased protection against aging, deposits and corrosion of the
Metals in the various circuits of older or modern equipment (steel, aluminum, copper, brass, solder, etc.); this protection
has been confirmed by numerous both static and dynamic tests.
The exclusive formulation was developed to avoid the risks of precipitation of inhibition systems. It must not be diluted or
be mixed with other heat transfer fluids or tap water.
Only CHAUFASOL S may be used to add heat transfer fluid.
In addition, the risks of medium-term deposits due to the corrosion of the plant but also due to the change of the
chemical compounds is also greatly reduced by the stability of the inhibition formula. The equipment and circuits must be free of zinc in order to
to avoid any sludge formation.
Info / Confo / Homolog
Compliant: SICC BT102-01
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
Glycol heat transfer fluid, according to SICC BT102-01 for
SOLAR SYSTEMS (solar modules, solar systems.
Ready for use, non-toxic, resistant to high
temperatures (>198°C), corrosion protected, filled with
demineralized water.
Propylene glycol-based (EC)
| Density | COV% | pH |
|---|---|---|
| 1.040 | 0 | 7.5 |
scope of application
It is a concentrated heat transfer antifreeze fluid based on propylene glycol and corrosion inhibitors, especially for
Solar heating systems with water circulation developed. Prevents the proliferation of bacteria and damage to the circulation systems.
Improves heat transfer capability and protects against frost (-27°C).
Nitrite-free, avoids lime deposits, suitable for tube collectors.
If the condition of the heat transfer fluid is no longer perfect (it is burnt), you can use the cleaning fluid Chaufaclean S
use to clean the plant.
Instructions for use
Recommended dosage:
Ready to use CHAUFASOL S is calibrated for -27°C with RECO water (according to SICC BT102-01), so it must be used undiluted.
Recommended use:
Suitable for high stagnation temperatures (>198°C), for systems with balancing collectors. Above this temperature there is a
slow deterioration of the fluid, which reduces its reliability, which may eventually lead to damage of the equipment
(carbonization) if the system is not drained into the expansion tanks.
The maintenance of the equipment in the field of solar energy ensures high performance and is carried out as part of the maintenance work
recommended.
For this purpose, our laboratory offers a quality control of the circulating fluid (CIRCUSOL analysis).
Hints:
Due to the large number of available building materials, it is recommended that a test on a test surface or a non-visible surface be carried out in advance.
if there is any doubt as to the nature or durability of the surface in question and its environment, or as to
the nature of the pollution exist.
properties
Appearance: transparent liquid, pink to light pink.
Pure density at 20°C: 1.043 +/-0.002 pH: 7.7 to 9.2 +/-0.2
Freezing point (slurry): -27 +/-2°C Boiling point at normal pressure : 105 +/-2°C
Conductivity: 1880.0 +/-100.0 microSiemens/cm Flash point: >100°C
The CHAUFAGEL S product is approved as a heat transfer fluid in domestic hot water preparation with easy replacement, as it does not contain any
poses a significant health risk.
Material compatibility:
The standard grades of the polymers listed below are normally compatible with CHAUFAGEL S.
The minimum and maximum operating temperatures depend on the quality of the elastomer and must be requested from the material manufacturer.
will.
Suitable for: Nitrile (NBR) / Hydrogenated Nitrile (H-NBR) / Acrylate (ACM) / Silicone (MVQ) / Fluorocarbon, Viton (FPM) / Ethylene Propylene Diene
(EPDM) / butyl group (IIR) / natural rubber (NR) / polychloroprene – Néopren (CR) / styrene-butadiene (SBR) / polypropylene (PP) /
Polytetrafluoroethylene, Teflon (PTFE) / Polyamide (PA) / Polyethylene (PEHD, PEBD)
/ Polyvinyl chloride (PVC) / Polyester resin (UP)-
This information does not constitute a warranty or commitment as to the manufacturing quality of the material.
CHAUFAGEL S provides excellent frost protection as well as increased protection against aging, deposits and corrosion of the
Metals in the various circuits of older or modern equipment (steel, aluminum, copper, brass, solder, etc.); this protection
has been confirmed by numerous both static and dynamic tests.
The exclusive formulation was developed to avoid the risks of precipitation of inhibition systems. It must not be diluted or
be mixed with other heat transfer fluids or tap water.
Only CHAUFASOL S may be used to add heat transfer fluid.
In addition, the risks of medium-term deposits due to the corrosion of the plant but also due to the change of the
chemical compounds is also greatly reduced by the stability of the inhibition formula. The equipment and circuits must be free of zinc in order to
to avoid any sludge formation.
Info / Confo / Homolog
Compliant: SICC BT102-01
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!
