BEST SELLING: Self-shining 2 in
1 emulsion. Shiny, very highly concentrated;
their high content of copolymer and their
allows excellent hiding power
the soil treatment in just one application,
as a substitute for the use of
Pore filler / filling compound. Her
Resistance to sole marks
is extraordinary. This results in a
considerably reduced working time and
lower treatment costs.
field of use
Ideal Ciro One is a multi-purpose, self-shining, high concentration emulsion. She can be flexible at all
or hard surfaces: linoleum, PVC, vinyl asbestos, laminated wood, terracotta tiles,
Ciro ONE is highly concentrated compared to conventional self-shining emulsions. This high one
The copolymer content and its excellent hiding power make it possible to treat a floor with only
an application. This results in a considerable reduction in the working time and thus the costs for
the treatment use.
This self-shining emulsion can be easily processed using conventional methods and
can easily be applied in several layers. That’s how you get one
more radiant, more intense, deeper shine.
In addition, Ciro ONE has a very high wear resistance, resistance to water and
Cleaning solutions on; As a rule, treading does not lead to wear and tear, or hardly any, to wear and tear
on the treated floors. The resistance to sole marks and scratches is exceptional.
The durability or service life of the protective film is particularly high and therefore under
interesting from an economic point of view.
To achieve good adhesion of the dispersion, old wax layers must be removed with the special paint stripper
After treatment, the floor must be carefully rinsed with water to remove all solid particles and
To remove paint remover residues.
Ideal Ciro ONE is to be used undiluted on the clean and dry floor and preferably with the help of a
applied to a special applicator. The average coverage is between 30 and 50 m²
per liter of product and per shift; it depends essentially on the porosity of the subsurface.
For the best result, it is better to apply 2 thin coats than a single thick coat.
A dispersion layer dries in a ventilated room and, depending on the ambient temperature, inside
from 30 minutes to 1 hour.
After applying the last layer, it is recommended to wait a few hours before applying this again
is used / entered.
Do not use or store at temperatures below + 5 ° C. Rinse the equipment (applicator) under running water.
The surfaces treated with Ideal Ciro ONE can be wiped through with a damp mop
Spray clean using standard or high speed methods.
Each method corresponds to one or more special products:
– Cleaning and / or disinfecting solution for damp wiping and with the mop, for example: Ideal Sols, Ideal Asepto
– «Wash and Wax» product for wet treatment: Sols Cire
– specific products for spraying: Ciro SPRAY
When cleaning, the properties inherent in the protective film, such as gloss,
Resilience, slip resistance … are retained.
10 Lt canisters
For larger orders, ask for a reduced offer. We would be happy to make you an interesting offer!